Automatic blood pressure monitor PRO-33 with adapter №1

Use The device is used for indirect measurement of systolic and diastolic blood pressure and heart rate by the oscillometric method in medical institutions or at home. How to take - Before using the device, carefully read the operating instructions. - Do not move, remain calm, and rest for 5 minutes before measuring blood pressure. - The cuff should be positioned at heart level. - Do not move or talk during the measurement. - To determine blood pressure, take measurements on both arms. Subsequently, measurements should be taken on the arm where the blood pressure is higher. - Always loosen the cuff between measurements and pause for about 5 minutes to restore blood circulation in the arm. - Place the cuff on a bare arm 1-2 cm above the elbow crease. The red mark (Artery mark) should be above the elbow crease. The cuff should fit snugly around the arm, but not too tightly. - Insert the air tube connector into the corresponding socket of the device. - Press the ''Start'' button. The measurement will begin automatically. - The device will automatically turn off if it is not used for more than one minute. Contraindications It is forbidden to use the device if there are any skin integrity damages in the forearm area. Storage Ambient temperature during storage and transportation: from -20degreeC to 70degreeC. Ambient humidity during storage and transportation: from 10% to 95% (relative humidity).